Sangens Block W6-9 Steam Bath and Sauna Control Unit

Availability of information

The control unit integrates 2 LED panels displaying the air temperature along with the temperature of the closed heater. Feel free monitoring the current temperature or setting your own, easily changing the settings with just two buttons.

High functionality

The control unit has 5 light indicators built into it, which will inform you about the proper operation of the heater and show which mode is currently active – ECO mode, heater or air heating mode.

Multi-mode

Using the control unit, you can heat your space in the “Drying” or “Heating” mode. In the Drying mode, the heater heats the room after procedures. The control unit will turn off the heater when the temperature reaches 90°C or after 40 minutes. The Heating mode warms up the space to 28°C until the heater turns off.

Creating an ideal microclimate

At the bottom of the control unit, there is a clear guide on how to set up the temperatures for each mode – Finnish sauna, Russian hard/soft steam baths, drying and heating.

Automatic shutdown timer

Set the heater's automatic shutdown time to create a truly safe steam bathing environment. The control unit will automatically turn off the device after a specified amount of time.

Delayed start

The control unit has a delayed start function. You can set in advance the time when you need your steam room ready along with the necessary options.

Dashboard

There is a dashboard on the control unit showing total operation time as well as air heating and heater element performance in the closed heater. You can track the current operating life of the heater in a format, which is most convenient for you.

Care for every customer

Sangens Service&Care promptly address challenges of any complexity helping to install, set up, maintain and operate the control unit.