Decorative Frame for Sangens electric heaters
To install the frame in the bench structure, make a 445x445 mm cutout in the structure.
Fasten the frame into the edge of the cutout using 9 x 25x3.5 drywall screws.
The cutout location in the structure shall ensure that safe distances from the walls are observed in accordance with the Sangens Electric Heater Stove W12G, W20G Installation Manual. 150 mm – from the side wall, 200 mm – from the rear wall, for flammable surfaces.
100 mm – from the side wall, 150 mm – from the rear wall, for nonflammable surfaces.